Search
Start Saving
Toilet Partitions
Washroom Accessories
Lockers

  Home > Towels/Waste Accessories > Towel/Waste Combination Units >

ASI 046926 Semi Recessed Roll Paper Towel Dispenser and Waste Receptacle Cabinet, Satin
046926 ASI Roll Paper Towel Dispenser with Trash Can Image image
Base Recessed Model 0469 Shown
  
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $1,159.30
Our Price: $637.70
Savings: $521.60
Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days


Product Code: 046926
Qty:

Description Technical Specs
 
ASI 046926 Semi Recessed Roll Paper Towel Dispenser and Waste Receptacle Cabinet, Satin Finish
Construction
Semi-Recessed Roll Paper Towel Dispenser and Waste Receptacle Cabinet shall hold one towel roll 8" diameter x 8" wide and one stub roll 3" diameter x 8" wide and dispense single full width cut towel 12" long from pull-towel auto-cut dispenser. Dispenser mechanism is supplied installed and automatically changes over from depleted stub roll to start new roll without interruption. Waste receptacle shall have a capacity of 1.83 cu ft or 13.5 gal. Unit door, frame, waste container, and cabinet shall be fabricated of type 304 stainless steel alloy 18-8. Door and back shall be 18 gauge, all other parts shall be 22 gauge. All exposed surfaces shall have satin finish protected by PVC film easily removed after installation. Door shall be attached to cabinet at side with a full-length 3/16" diameter stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1" wide formed from one piece with no miters, welding, or open seams and have 1/4" square return to wall. Structural assembly of all components shall be of welded construction. Cabinet shall have no exposed fastening devices or spot-welded seams. Labeling is provided to indicate correct operation.

Installation
RWO: 15-3/4" W x 54-1/2" H x 4" D minimum
Install unit in wall recess using four (4) No. 10 self tapping screws (by others) through concealed mounting holes provided. Roll towel mechanism is furnished installed. Note that top of rough wall opening is 3/4" below top of unit.

For ADAAG compliance install unit so that top of side actuating control is 48" maximum above finished floor (MAX AFF).

Operation
User grasps leading edge of towel and pulls it out of unit until cycle reaches auto-cut position while supply is not depleted. Next towel automatically presented ready for use by next user after current cut-off cycle is completed. Towels are loaded by opening cabinet door to access dispenser mechanism and by following instructions provided. Waste container is emptied manually on cycle determined by maintenance needs. Locked compartment and receptacle retainer prevents unauthorized access or removal.

Share your knowledge of this product. Be the first to write a review »