645210A-00 ASI Paper Towel Dispenser

Home > Towels/Waste Accessories > Towel Dispensers >

ASI 645210A-00 Piatto™ Collection Completely Recessed Automatic (Battery Operated) Roll Paper Towel Dispenser, White

645210A-00 ASI Automatic Paper Towel Dispenser image

List Price: $1,403.60

Our Price: $772.00

Savings: $631.60

Manufacturer: ASI
Availability: 4-5 Weeks

Product Code: 645210A-00

Qty:

Description

Technical Specs

ASI 645210A-00 Piatto™ Collection Completely Recessed Automatic Touchless Roll Paper Towel Dispenser, White, Battery Operated

Requires 4 Alkaline "D" Battery Cells (not included)

Construction

Piatto™ Collection Recessed Automatic Paper Towel Dispenser holds and dispenses one 8" diameter x 8" wide standard towel roll up to 800 ft. long and one 8" wide stub roll up to 4" diameter and shall automatically change over to main roll when finished with stub roll when feed tabs are properly engaged. Automatic Touchless Roll Towel Dispenser shall be powered by four (4) D-size batteries (not supplied) and shall operate automatically to activate towel dispensing when hands are placed in sensor zone. At each activation unit shall feed out a length of towel selected by owner by setting length, delay and paper saver switches. Unit shall have an internal towel cut-off bar. Towel dispensing opening shall have a fully deburred edge for snag free dispensing and user safety. Frame and cabinet shall be 20 gauge type 304 alloy 18-8 stainless steel and shall have no exposed fastening devices. Flush face door shall be 1/2" thick black edged phenolic with matte black (-41) or white (-00) outer and inner surfaces as chosen by tail code on model number. Door shall be attached to the side of cabinet with two (2) zero-clearance concealed cabinet hinges and shall be held closed with a spring-pin L-latch. Structural assembly of all components shall be of welded construction. Owner's Installation Instructions shall be packed with unit. Installation set-back gage and depth stops shall be provided. Capacity: 8" Standard Core Roll

Installation

Finished Wall Opening FWO: 16-1/8" W x 28-1/16" H x 10" D

Unit is recessed mounted in wall using four (4) № 10 x 1-1/2" [M5 x 38] Pan Head self tapping screws (by others) through concealed mounting holes provided in shim-less adjustable mounting tabs.

For compliance with 2010 ADA Accessibility Standards install unit so that towel dispenser chute opening is 48" maximum above finished floor (AFF). For general utility mount unit 47-3/8" AFF to bottom of unit. See OM & IG for complete installation instructions packed with unit.

Operation
Towels are dispensed one length at a time automatically when hands are placed in sensor zone until supply is depleted. Length of towel dispensed is predetermined by owner by making selections on three (3) three-position switches for length, delay, economy. Unit may be reloaded with a full roll to automatically start when finished with an existing partial roll and will continue to feed properly when reloaded with a full roll and partial roll is transferred to stub roll position. Refill dispenser by opening the door and replacing towel roll for an empty or partially empty unit. Dispenser supply is replenished and batteries are replaced manually on cycles determined by maintenance needs.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Alternate Options
645210A-41 Black, Recessed, Battery Operated
645210AC-41 Matte Black, Recessed, AC Powered
645210AC-00 White, Recessed, AC Powered