645210A-6 ASI Paper Towel Dispenser

Home > Towels/Waste Accessories > Towel Dispensers >

ASI 645210A-6 Semi Recessed Automatic Touchless Roll Towel Dispenser, Satin Finish

645210A-6 ASI Paper Towel Dispenser image

List Price: $1,080.90

Our Price: $594.50

Savings: $486.40

Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days

Product Code: 645210A-6

Qty:

Description

Technical Specs

ASI 645210A-6 Simplicity Collection Semi Recessed Automatic Touchless Roll Paper Towel Dispenser, Satin Stainless Steel Finish

Construction
Semi-Recessed Automatic Roll Paper Towel Dispenser shall hold and dispense one 8" wide x 8" diameter standard towel roll up to 800 ft. long and one 8" wide stub roll up to 4" diameter. Automatic touchless roll towel dispenser shall be powered by four (4) D-size batteries (not supplied) and operate automatically to activate towel dispensing when hands are placed in sensor zone from 1/2" below sensor to 4-1/2" below sensor. Unit shall feed out a length of towel during each activation selected by owner by setting length, delay, and paper saver switches. Unit shall have an internal towel cut-off bar. Cabinet and frame shall be fabricated of 20 gauge type 304 stainless steel alloy 18-8, and towel dispenser door shall be 18 gauge same grade. All exposed surfaces shall have satin finish. Door shall be attached to cabinet at side with a full-length 3/16" diameter stainless steel multi-staked piano hinge and shall have a full boxed return for user safety. Door shall be held closed with two (2) tumbler locks keyed alike to other ASI washroom equipment. Face trim shall be 1" wide formed from one piece to lay flat to wall. Structural assembly of all components shall be of welded construction. Cabinet shall have no exposed fastening devices or spot-welded seams. Unit shall be supplied with 6" SR collar for semi-recessing.

Installation
Mount in wall recess using a minimum of four (4) № 10 self-tapping screws (by others) through concealed mounting holes provided. Note that top of Rough Wall Opening (RWO) is 11/16" below top of unit.

For compliance with ANSI A-117.1, 2015 ABA Standards, and 2010 ADA Accessibility Standards, install unit so that top edge of towel dispenser opening is 48" maximum above finished floor (AFF) only if clear floor reach access is provided.

For general utility, install unit with top of towel dispenser opening between 49" and 56" AFF.

Rough Wall Opening Required: 14-3/4" W x 26" H x 3-1/2" D

Operation
Towels are dispensed one length at a time automatically when hands are placed in sensor zone until supply is depleted. Length of towel dispensed is predetermined by owner by making selections on three (3) three-position switches for length, delay, economy. Unit may be reloaded with a full roll to automatically start when finished with an existing partial roll and will continue to feed properly when reloaded with a full roll and partial roll is transferred to stub roll position. Refill dispenser by unlocking the door and replacing towel roll for an empty or partially empty unit. Dispenser supply is replenished and batteries are replaced manually on cycles determined by maintenance needs. Locking door prevents unauthorized access and roll or battery removal.