64672-41 ASI Paper Towel Dispenser with Trash Can

Home > Towels/Waste Accessories > Towel/Waste Combination Units >

ASI 64672-41 Piatto™ Collection Completely Recessed Three in One Towel Dispenser/Hand Dryer/Waste Receptacle, Matte Black Phenolic Door

64672-41 ASI Paper Towel Dispenser with Trash Can image

Alternative Views:

List Price: $2,767.70

Our Price: $1,522.24

Savings: $1,245.46

Manufacturer: ASI
Availability: Usually Ships in 5-7 Weeks

Product Code: 64672-41

Voltage*:

110-120V
208-240V

Qty:

Description

Technical Specs

ASI 64672-41 Piatto™ Collection Completely Recessed Three in One Towel Dispenser/Hand Dryer/Waste Receptacle, Matte Black Phenolic Door

Construction

Piatto™ Collection Three-in-One Paper Towel Dispenser with Waste Receptacle and Automatic Electric Hand Dryer has a frame and cabinet constructed of 20 gauge type 304 alloy 18-8 stainless steel and shall have no exposed fastening devices. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Waste receptacle shall have piano-hinge mounted closed top with spring-hinge closed flap door and hemmed edges for safety. Flush face door shall be 1/2" thick black edged phenolic with matte black (-41) or white (-00) outer and inner surfaces as chosen by tail code on model number. Door shall be attached to the side of cabinet with four (4) zero-clearance concealed cabinet hinges and shall be held closed with a spring-pin L-latch. Structural assembly of all components shall be of welded construction. Installation set-back gage and depth stops shall be provided.
Towel Capacity: 400 C-Fold or 500 Multifold
Waste Capacity: 6.8 Gallons

Installation

Finished Wall Opening FWO: 15-7/16" W x 55-7/16" H x 7-5/8" D
using six (6) № 10 x 1-1/2" [M5 x 38] self tapping Pan Head screws (by others) through concealed mounting holes provided in Shim-less adjustable mounting tabs. See IG diagram for electrical service cable rough-in location. Electric service is supplied and connected (by others) prior to installing cover and brought to FWO at location indicated on diagram and is hooked up (by others) in accordance with schematic and OM & IG provided with unit. Dryer is mounted to chassis wiring box with four (4) 1/4-20 pan head screws (provided) through bushings in heavy-duty back plate. Electrical service is connected (by Electrician) prior to installing cover. Cover is secured to back plate with recessed socket-pan-head tamper-resistant pin-hex bolts (supplied) with security pin-hex driver (supplied). See OM & IG for complete installation instructions packed with unit.

For compliance with 2010 ADA Accessibility Standards install unit so that towel dispenser outlet is 48" maximum above finished floor (AFF).

Operation
Paper towels are manually withdrawn through dispensing slot and feed properly until depleted. Unit will continue to feed towels properly when correctly reloaded with a partial load in place. User activates dryer by placing hands in the sensor zone indicated by graphic on door. Drying time is automatically initiated as long as movement is sensed up to a maximum of two (2) minutes to prevent accidental hold-on. Dryer automatically shuts off after time-out when hands are removed from the sensor zone. Refill dispenser by opening door and replacing towels for an empty or partially empty unit. Dispenser supply is replenished and waste container is emptied manually on cycles determined by maintenance needs. Full cover and spring-hinge flap door on WR prevents unsightly overloads.

Options
Model 64672-00 White, Recessed 3-in-1 Paper Towel, Hand Dryer, and Waste Receptacle Combination Unit