 |
 |
 |
 |
|
 |
|
**Note: This model is for top fill multi feed. Dispenser Only. The multi feed system requires model 0390 kit (purchased separately) and 0390-R remote (purchased separately) to operate. (The 0390 Kit includes 6 L container, top fill tube, and counter fill port with cover)
Soap Recommendation (See "A Note from the Manufacturer Section" for tested soaps)
Liquid soap. Clear liquid, no abrasives.
pH Range: 7+/- 1.5
Viscosity Range mPas-cP: 100-3800
Construction
EZ Fill™ Vanity Mounted Automatic Soap Dispensing System Soap Dispenser shall dispense liquid soap with pH in range
7± 1.5 and viscosity in range 100–3800 cP (mPas) and shall dispense in stream cycles with volumes of approximately 0.007
oz to 0.08 oz in four (4) steps programmable by owner with remote control programming unit (optional, P/N 0390-R) with factory preset at approximately 0.03 oz. Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry and peristaltic pump is powered by six (6) ‘D’-size
1.5V batteries (supplied by others) in a screw-locked IP67 rated compartment (provided) located under counter or an AC
Adapter (also IP67 rated, provided, select model) plugged into GFCI outlet (by others). Unit shall have chrome plated spout
and sensor housing with a highly polished finish (or Matte Black when code –41 is specified) over all exposed surfaces. Unit
shall have LED in sensor to indicate function and battery condition (when Battery Box, 0390-BP {provided}, is used). A self
-adhesive label shall be supplied for use at owner’s option to indicate dispenser function. Unit shall mount on vanity deck up
to 2" thick through 1" minimum diameter hole to 1-1/4" maximum diameter hole and shall resist forced rotation up to 177 in-lbf (20
Nm) with 0390-ARK properly installed (provided).
NOTE: Soap supply shall be from Model Number 0390 EZFill™ Vanity Mounted Top-Fill Port and Multi-Feed Tank (supplied separately) with capacity of 1.6 Gal (6 L) of liquid soap containing
no abrasives or particulates. Up to six (6) individual EZFill™ vanity mounted automatic soap dispenser units shall draw
from each Multi-Feed tank located under counter through connection with under-counter soap distribution tubing (provided).
See Owner’s Manual and Installation Guide (OM & IG) for more detail. They shall be provided with unit in carton.
Installation for both AC and Battery Operated
Install spout and sensor housing to vanity deck with anti-rotation kit escutcheon flange, rubber washers and basin nut
(supplied) through 1-1/8" diameter mounting hole and 5/32" diameter adjacent hole for anti-rotation pin of escutcheon
flange. Mount pump/control housing to convenient structure under vanity within 24" of shank bottom with two (2)
screws and wall anchors (supplied). Connect flex tubing from dispenser shank to fitting on top of pump/control housing.
Connect spout control cable plug into control unit inline cable connector. Connect clear soap supply flex tubing (provided
attached to fitting on pump/control housing) to one of six available connectors on Model Number 0390 Multi-Feed tank (supplied
separately) so that tube end is just above bottom of tank. Mount battery compartment in convenient location under vanity
deck with two (2) screws and wall anchors (supplied) within easy reach of extension cable length and plug connector into
mating inline power connector. Install six (6) ‘D’-size 1.5V cells (supplied by others) in under-deck battery compartment
according to polarity indication, plug battery cable jack into battery box socket in cover handle and screw lock cover. Alternatively, plug AC Adapter into GFCI power outlet located under vanity within 13.5 ft (412 cm) of pump/control housing
and plug connector into mating inline power connector.
See Owner’s Manual and Installation Guide (OM & IG) for more detail. They shall be provided with unit in carton.
Operation
Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry and peristaltic pump
is powered by six (6) ‘D’-size 1.5V batteries (supplied by others) in a screw-locked IP67 rated compartment
(provided) located under counter or an AC Adapter (also IP67 rated, provided, select model) plugged into GFCI outlet (by others).
To activate dispenser, place hand under spout near the sensor for approximately 1 second. Spout dispenses 0.03 oz of liquid hand soap. Optional remote control unit p/n 0390-R allows owner programming of alternate dispense amounts. Unit will dispense soap while batteries are at suitable charge level, correct viscosity soap is present in the tank, and system is correctly maintained to enable dispensing (red LED is not flashing continuously - low battery or does not remain dark - no battery charge). There is a push button that releases soap for easy soap priming.
Warranty
Two (2) Years Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for Two (2) years from date of sale.
Liquid Soap Dispenser Options
Model 0391-1A Universal Stand Alone Model, Battery Operation, Bright Chrome Plated Finish
Model 0391-1A-41 Universal Stand Alone Model, Battery Operation, Matte Black Finish
Model 0391-1AC Universal Stand Alone Model, AC Adapter Operation, Bright Chrome Plated Finish
Model 0391-1AC-41 Universal Stand Alone Model, AC Adapter Operation, Matte Black Finish
Model 0390-1A Top Fill, Multi Feed Dispenser Head, Battery Operation, Bright Chrome Plated Finish
Model 0390-1A-41 Top Fill, Multi Feed Dispenser Head, Battery Operation, Matte Black Finish
Model 0390-1AC Top Fill, Multi Feed Dispenser Head, AC Adapter Operation, Bright Chrome Plated Finish
Model 0390-1AC-41 Top Fill, Multi Feed Dispenser Head, AC Adapter Operation, Matte Black Finish
Foam Soap Dispenser Options
Model 0394-1A Universal Stand Alone Model, Battery Operation, Bright Chrome Plated Finish
Model 0394-1AC Universal Stand Alone Model, AC Adapter Operation, Bright Chrome Plated Finish
Model 0394-1AC-41 Universal Stand Alone Model, AC Adapter Operation, Matte Black Finish
Model 0393-1A Top Fill, Multi Feed Dispenser Head, Battery Operation, Bright Chrome Plated Finish
Model 0393-1A-41 Top Fill, Multi Feed Dispenser Head, Battery Operation, Matte Black Finish
Model 0393-1AC Top Fill, Multi Feed Dispenser Head, AC Adapter Operation, Bright Chrome Plated Finish
Model 0393-1AC-41 Top Fill, Multi Feed Dispenser Head, AC Adapter Operation, Matte Black Finish
Model 0390 (0390-41 for Matte Black Cover) is kit for multi-feed kit dispenser head option 0390-1A or 1AC, 0393-1A or 1AC (-41 for Matte Black Cover). Includes 6 L container, Top Fill Tube, and Counter Fill Port with Cover
|
|
|
|
|
|
| Accessories |
|
ASI 0390-BR EZ Fill™ Soap Dispensing Multifeed Tank Mounting Bracket
|
|
ASI 0390-1AC EZ Fill™ Automatic Liquid Soap Dispenser - Multi Feed Dispenser Head, AC Plug In, Chrome Finish
|
|
ASI 0390 EZ Fill™ Soap Dispensing Multifeed Kit (serves up to 6 units), Polished Finish Fill Port with Cover
|
|
ASI 0390-R EZ Fill™ Soap Dispensing Multifeed Remote Control
|
|
|
|
|
|
|
|
|
|
|
|
|
ASI 0391-1A EZ Fill™ Automatic Liquid Soap Dispenser - Stand Alone Unit, 1 L, Battery Operated, Chrome Finish
|
|
ASI 0390-1A EZ Fill™ Automatic Liquid Soap Dispenser - Multi Feed Dispenser Head, Battery Operated, Chrome Finish
|
|
ASI 0391-1A-41 EZ Fill™ Automatic Liquid Soap Dispenser - Stand Alone Unit, 1 L, Battery Operated, Matte Black Finish
|
|
ASI 0390-ARK EZ Fill™ Anti Rotation Kit for 0390 Collection
|
|
|
|
|
|
|
|
|
|
|
|
|
ASI 0390-1AC-41 EZ Fill™ Automatic Liquid Soap Dispenser - Multi Feed Dispenser Head, AC Plug In, Matte Black Finish
|
|
ASI 0390-1A-41 EZ Fill™ Automatic Liquid Soap Dispenser - Multi Feed Dispenser Head, Battery Operated, Matte Black Finish
|
|
ASI 0391-1AC-41 EZ Fill™ Automatic Liquid Soap Dispenser - Stand Alone Unit, 1 L, AC Plug In, Matte Black Finish
|
|
ASI 0391-1AC EZ Fill™ Automatic Liquid Soap Dispenser - Stand Alone Unit, 1 L, AC Plug In, Chrome Finish
|
|
|
|
|
|
|
|
|
|
|
|
|