Search
Start Saving
Toilet Partitions
Washroom Accessories
Lockers

  Home > Toilet Tissue Dispensers > Multiple Roll >

ASI 0481-HCR Reverse Partition Mtd Napkin Disposal, Seat Cover and Toilet Tissue Disp
ASI 0481-HCR Toilet Paper Holder image
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $942.90
Our Price: $518.60
Savings: $424.30
Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days


Free Shipping
Product Code: 0481-HCR
Qty:

Description Technical Specs
 
ASI 0481-HC Reverse Partition Mounted Dual Access ADA Compliant Napkin Disposal, Seat Cover Dispenser, and Toilet Tissue Dispenser - Satin Finish
One side mounts flush on barrier free compartment side to allow grab bar clearance

Construction
Partition mounted seat cover and toilet paper dispenser with sanitary napkin disposal is fabricated of type 304 stainless steel alloy 18-8. The face trim mounting flanges are 22 gauge of one piece construction 1" wide with no welded miters and has square 1/4" square returns to face of partition. The flange on the barrier free side is flush with face of unit to permit flush mounting behind grab bar (not included). The door is connected to cabinet with a full length piano hinge and held closed with two tumbler locks keyed like other ASI washroom equipment. Disposal door is hung on spring loaded hinges. Theft resistant and vandal resistant rollers are molded of high impact resistant plastic with integral molded in stainless steel end pins. Two (2) R-004 rollers are included. All exposed surfaces are satin finish.

Installation
Partition Cut Out required is 15-1/2" W x 28-7/8" H x 1/2" to 3-3/4" thick partitions (394 x 733 x 13 to 95)

Mount unit in partition using No. 10 x 3/4" self tapping screws (supplied) through holes provided. Holes in flanges are offset to prevent screw interference. Note: partition cut out is 7/8" below top of face trim.

For compliance with ICC/ANSI A-117.1 and 2010 ADA Accessibility Standards top of cutout should be between 43-3/4" and 50-7/8" above finished floor (AFF). One trim mounting flange adjusts for partition thickness of 1/2" to 3-3/4". To comply with CalDAG mounting height, top of cutout should be 42-7/8" AFF maximum. If optional grab bar is used (not supplied) it is positioned across unit with top of grip surface at 33" AFF minimum.

Operation
Toilet paper rolls, paper seat covers, and waste removal are serviced by unlocking and opening the door. Seat covers are self feeding until supply is depleted. Seat cover dispenser holds and dispenses 1000 paper seat covers. Toilet tissue dispenser holds and dispenses four (4) standard or four (4) 4-1/2" x 5-1/4" diameter tissue rolls. The spindles are vandal resistant and only accessible when door is opened. The napkin disposal is 1.3 gallons.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Share your knowledge of this product. Be the first to write a review »