ASI 3802-48AW 48" Inch White Antimicrobial Grab Bar with intermediate support

Home > Grab Bars > Straight, 1-1/2" OD >

ASI 3802-48AW 48" Straight Concealed Mount Grab Bar with intermediate support 1-1/2" (38mm) OD - White Antimicrobial Powder Coated Finish

ASI 3802-48AW 48" Inch White Antimicrobial Grab Bar with intermediate support image

Intermediate Support Not Shown

List Price: $164.90

Our Price: $90.70

Savings: $74.20

Manufacturer: ASI
Availability: Usually Ships in 2-3 Business Days

Product Code: 3802-48AW

Qty:

Description

Technical Specs

ASI 3802-48AW 48" Straight Concealed Mount Grab Bar with intermediate support, 1-1/2" (38mm) OD - White Antimicrobial Powder Coated Finish

Construction

Germ Guard™ Antimicrobial white powder coated grab bar with snap on flange covers for concealed mounting are type 304 stainless steel alloy 18-8. The white powder coating shall present silver ions (Ag+) on the surface for the lifetime of the grab bar and shall maintain an effective kill rate for bacteria, algae, fungus, mold, mildew, and yeasts exceeding 99.95% as verified by independent Lab Testing per JIS Z 2801, which corresponds to ISO 22196:2007. The coating shall have durability ensured by independent Lab Testing to withstand ASTM salt spray corrosion and ASTM cross-cuts adhesion and impact peel. Tubing is 1-1/2" diameter x 18 gauge. Snap on cover shall be 22 gauge. Flange is 1/8" thick and shall be Heliarc welded to tubing with a continuous concealed bead. End flanges shall have two (2) 5/16" dia. mounting holes. If any center posts, they will have two (2) keyhole slots to ease installation access.

ASI Grab Bars are designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1 and 2010 ADA Accessibility Standards. Mounting to the wall is a critical part of the system to meet this requirement. To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation
Use grab bar as template to mark mounting holes locations and pre-drill holes. Install bar using two (2) No. 10 self tapping pan head screws and flat washers (by others - see item 3901 in Accessories listed below) or other fastener system (by others - see Accessories listed below for grab bar mounting kits) to suit conditions for each flange. Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.

For compliance with ADA Accessibility Guidelines install unit so that the top of the grab bar is 33" minimum above finished floor (AFF) to 36" maximum AFF.

Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.

Additional Options
Custom Grab Bar configurations and sizes are available.

Call us at 920-569-0895 ext. 2 or email [email protected] for pricing and lead times.