|
|
|
|
|
|
|
Size Options Model 8203 = 18" W Model 8203-20 = 20" W Model 8203-28 = 28" W Model 8203-33 = 33" W
Construction Phenolic Fold –Up Shower Seat shall have all metal parts fabricated from alloy 18-8 stainless steel, type 304; seat
frame and support legs shall be 1" diameter and 1-1/4" square x 18 gauge with 3/16" mounting
flanges and 16 gauge guide bracket/arm support. All exposed surfaces shall have satin finish. Seat shall be
5/16" thick phenolic with white color top and bottom surfaces and shall have black edges. Structural assembly shall
be of welded construction and all exposed edges and corners shall be radiused and/or deburred. Support arm shall fold
up when in retracted position to provide low profile against wall. No extra fittings shall be required to retain seat in
storage position. Guide bracket shall control seat lowering into operating position. Unit shall satisfy 2010 Accessibility
Standards when mounted properly.
ASI Shower Seats are designed to meet and exceed 2010 ADA Accessibility Standards and ANSI A117.1 that
fabricated product shall be of adequate strength to support a load of 250 pounds (113.4 kg) and unit shall conform to
size and edge clearances as diagrammed. Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system
must be adequately sized. Unit will carry a load of 500 lbs if properly installed. The supporting wall must be adequately reinforced to carry the rated load for the products lifetime.
Installation This unit is surface mounted. Installer/construction contractor must provide concealed anchor plate or blocking as
specified in construction documents or as required by local building codes prior to wall finishing. Fasten unit flanges
and guide bracket to concealed anchor or blocking plate with appropriate hardware. Note that concealed mounting plates or anchors and hardware are not supplied with this product and must be specified
separately. Ensure that mounting configuration complies with local building codes.
Warranty One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
Operation Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise for
departure and arrival. Guide bracket with spring detent prevents seat from dropping and provides positive support
in usage position as well as spring locked storage position.
|
|
|
|
|
|
|