 |
This product (B-3974-350) is only compatible with Bobrick's recent product design change that took place in February 2023. Retrofit kit (B-3974-85) has been created to allow for the conversion from the old design to the new one. (included with B-3974-350)
Works with B-3944 series, B-3961 series, and B-3974 series.
Construction
Convertible automatic universal roll paper towel module shall be Type-304 stainless steel with all-welded construction; exposed surfaces shall have a satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a concealed tumbler lock keyed like other Bobrick washroom accessories. No-touch dispenser, equipped with an intuitive LED light to direct patrons to the dispense area. Dispenses universal, 1-1/2" to 2" diameter core, up to 8" diameter, 8" wide, non-perforated, non proprietary paper towel rolls. 800 ft long. LED light on the door flashes green when dispenser is ready to dispense, flashes slowly red to indicate it needs paper, and red and green (alternating) to indicate low battery. Towel length can be set to short 10", medium 12", and long 14". Dispenser can be set to exposed hidden mode which determines whether a paper towel hangs down when in idle mode. Customizable sensor can be set to 4", 6" or 8". Dispenser includes a 3-1/2" diameter stub roll feature. Paper advance button dispenses paper when pressed. To adapt to changing needs in washrooms, this unit is field convertible with the Folded Towel Dispenser or (Mechanical) Universal Roll Towel Dispenser. Dispenser is powered by a 4 "D" size alkaline batteries (not furnished) or an external 6 volt AC to DC switching power supply. Power supply optional accessory is Bobrick AC Adapter Kit Part No B-3974-57.
Towel Capacity: Universal Standard Core Non-perforated Rolls 8" W x 8" D
Installation
Remove existing dispenser module, then install new automatic universal roll towel module per Form No. 3974-269. For removal of Convertible Folded Towel Module refer to Form No. 3944-69. For removal of (Mechanical) Universal Roll Towel Dispenser Module refer to Form No. 3961.69. Open battery cover at the front of the dispenser and install 4 "D: size alkaline batteries. Select sheet length and "Paper Saver" mode using the switches to the right of the batteries. Load paper towel using the instructions on the dispenser.
Electrical supply for use with 6 volt AC to DC power supply must be installed per applicable building codes.
Operation
Adjustable (2", 3.5", 4") electronic sensor automatically dispenses towel when hands are placed under the towel opening. Intuitive LED light on door directs patrons to dispense area. Dispenses universal, 1-1/2" to 2" diameter core, up to 8" diameter, 8" wide, non-perforated, non proprietary paper towel rolls. LED light on the door flashes green when dispenser is ready to dispense, flashes slowly red to indicate it needs paper, and red and green (alternating) to indicate low battery. Towel length can be set to short 10", medium 12", and long 14" lengths. Dispenser can be set to exposed or hidden mode which determines whether a paper towel hangs down when in idle mode. Customizable sensor can be set to 4", 6", or 8". Dispenser includes a 3-1/2" diameter stub roll feature. Paper advance button dispenses paper when pressed. To adapt to changing needs of washrooms, this unit is field convertible with the Folded Towel Dispenser part number B-3944-152 or (Mechanical) Universal Roll Towel Dispenser Module part number B-3961-50.
|
|
|