|
Construction
Multi roll toilet tissue dispenser is fabricated of 18-8, type 304, 22 gauge stainless steel. It is an all welded construction. All exposed surfaces are satin finish. The door is held closed with a tumbler lock keyed like other Bobrick washroom accessories Theft resistant spindles are molded of heavy duty, one piece, molded ABS.
Installation
For partitions with particleboard or other solid core, secure with four (4) #10 x 5/8" (4.8 x 16mm) sheet metal screws (not furnished) at
points indicated by an S, or provide through bolts, nuts, and washers.
For hollow core metal partitions, provide solid backing into which sheet metal screws can be secured. If two units are installed back to back,
then provide threaded sleeves and machine screws for the full thickness of partition.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet metal
screws.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws or provide 3/16" (5mm) toggle bolts
or expansion bolts.
Operation
Holds two (2) standard core toilet tissue rolls up to 5-1/4" diameter. Tissue rolls are loaded and locked into dispensing mechanism. The extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after unlocking the door.
Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
|