|
Construction
Partition mounted toilet seat cover and multi roll toilet tissue dispenser is fabricated of 18-8, type 304 stainless steel. The cabinet is an all welded construction and includes plastic sight barrier panel for the toilet seat cover dispenser. Flange is drawn and beveled, one piece, seamless construction. The door is secured to the cabinet with a full length piano hinge and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Spindles are theft resistant, one piece, molded ABS. All exposed surfaces are satin finish.
Installation
Mount unit in toilet partition 1/2" to 3-7/8" (13 x 100mm) thick, centered through a cutout specially ordered from partition
manufacturer or field cut.
Dimensions of cutout are to be 15-1/2" wide x 28-7/8" high (395 x 735mm). Top of cutout should be
42-1/4" (1075mm) from finish face of floor with rear edge of cutout 20-1/2" (520mm) from back wall of compartment to allow
placement of horizontal grab bar at 33" (840mm) height across front of unit and installation of 18" vertical grab bar
(ICC A117.1-2009). For factory made cutouts, location and size details must be furnished to partition manufacturer. For
hollow core metal partitions, provide solid framing into which sheet metal mounting screws can be secured.
For installation with sheet metal screws furnished, place unit firmly in partition cutout, making certain entire perimeter of
fixed flange is flush with and tight against partition surface. Install the unit so the side that has the fixed flange flush with face
of cabinet is in the accessible toilet compartment for use by individuals with disabilities. Secure to partition with sheet-metal
screws through four mounting holes at points indicated by an S. On other side of partition, position adjustable flange
(which serves as an escutcheon) so mounting holes are not in line with mounting holes in fixed flange. Make certain entire
perimeter of adjustable flange is flush with and tight against partition surface before securing with sheet metal screws
furnished.
For through bolting method of installation, make sure mounting holes in adjustable flange are inline with holes in fixed flange.
Using adjustable flange as template to mark locations, drill 7/32" or 1/4" (5.5 or 6.4mm) holes through partition. Provide
four binder posts and #6 (3.5mm) flat-head screws to secure unit and its adjustable flange.
Note: Cutouts in Bobrick toilet partitions can be pre-cut for Bobrick partition mounted accessories at factory if location and
size of cutouts are specified and order for both partitions and accessories are received together.
Designer’s Notes:
1. Partition mounted B-3471 with one side flush to partition in accessible toilet compartment has toilet tissue dispenser on left side of unit.
2. Position unit on panel with toilet tissue dispenser outlet 24" (610mm) minimum, 42" (1065mm) maximum from rear wall.
3. For unit to mount on left side of toilet (when seated on toilet) see model B-34715.
4. For visual placement of models inside toilet compartment, click on the tab "A Note from the Manufacturer" next to the technical specs tab above.
Operation
Holds four (4) standard core toilet tissue rolls up to 5-1/4" diameter. Toilet seat cover dispenser holds 1000 single or half fold paper covers. The doors unlock with key provided and swing open for filling.
Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
|