Search
Start Saving
Toilet Partitions
Washroom Accessories
Lockers

  Home > Shower Accessories > Shower Curtains, Rods, and Hooks >

Bobrick B-4207 x 60" Curved Shower Curtain Rod with Swivel Brackets, 1" OD
Bobrick B-4207 60" Curved Shower Rod, 1" OD
 
Large Quantity, Item Customization, or Government Project? Request A Quote or give us a call at 920-569-0895
List Price: $105.00
Our Price: $60.38
Savings: $44.62
Manufacturer: Bobrick
Country of Origin: Taiwan
Availability: Usually Ships within 2-3 Business Days


Product Code: B-4207X60
Qty:

Description Technical Specs
 
Bobrick B-4207 x 60" Curved Shower Curtain Rod with Swivel Brackets, 1" OD
Construction
Shower curtain rod shall be 20-gauge stainless steel with satin finish. It shall have an outside diameter of 1". Swivel brackets shall be chrome-plated zinc die cast construction with exposed surfaces in architectural satin finish.

Installation
Place pivoting mounting bracket assemblies onto ends of curved shower curtain rod the same distance each end, with set screw bosses oriented in the downward direction. Insert set screws (2) provided by manufacturer into set screw bosses and thread them in loosely. While holding curved shower curtain rod assembly in final desired mounting location, securely tighten set screws, with Allen wrench provided, to retain pivoting mounting brackets to rod, and mark desired locations of pivoting mounting brackets on walls.

Disassemble wall mounting plate portions of the mounting brackets by removing the Phillips-head screws (2 each) from the top and bottom of the bracket assemblies.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure mounting plate portion of mounting brackets to walls in marked locations with #8 x 1-1/2" Phillips-head screws (4) provided by manufacturer.

For other wall surfaces, use fiber plugs or expansion shields for use with screws furnished, or provide 1/8" toggle bolts or expansion bolts.

Position curtain rod assembly in place and secure pivot sections of mounting brackets to mounting plates by replacing the Phillips-head screws (4) at top and bottom of mounting brackets.

Share your knowledge of this product. Be the first to write a review »