|
Construction
Surface mounted toilet tissue dispenser and utility shelf are fabricated of 18-8, type 304 stainless steel with satin finish. The shelf has 1/4" upward return front edges. The wall plate and post are securely welded as one piece. Wall plate has two screw holes for attachment. Toilet paper holder is equipped with a solid stainless steel rod for the dispenser bar that is secured to the post with a concealed set screw.
Installation
Mount unit on plaster or drywall with backing that complies to local building codes. Secure unit with sheet metal screws (not furnished).
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet metal screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.
For partitions with particle board or other solid core, provide sheet metal screws or through bolts, nuts, and washers (not furnished).
For hollow core metal partitions, provide backing into which the sheet metal screws (not furnished) can be secured.
Operation
Unit holds two (2) standard core toilet tissue rolls up to 4-1/4" diameter (roughly 500 sheets). They have free delivery and can be replaced once depleted.
Item complies with one hand operation and continuous paper flow requirement of ADA.
Designer's note: It is recommended that one full toilet tissue roll remain wrapped or taped until the other roll has been depleted to avoid wasting the ends of both rolls.
Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
|
