|
Construction
Spare toilet paper roll holder is fabricated of stainless steel alloy 18-8, type 304. It is 20 gauge wall thickness and 3/4" outside diameter. There is 2-1/8" clearance between
the toilet roll holder and wall. Concealed mounting flange is 7/32" thick stainless steel
plate, 1-13/16" outside diameter and equipped with two screw holes for attachment and thread on outside edge to
fasten cover. Threaded flange cover is 17-gauge stainless steel, 1-15/16" diameter and fastens over
mounting flange to conceal mounting screws. End of toilet roll holder shall pass through flange and be welded to form one
structural unit. Shelf plate is 1/8" thick stainless steel plate, 1-15/16" outside diameter and 3/4" inside diameter. Toilet roll holder shall pass through shelf plate and be welded to form a solid base. Satin Finish
Installation
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet metal
screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet metal screws (not furnished), or provide through bolts,
nuts, and washers. For hollow core metal partitions, provide solid backing into which the sheet metal screws (not furnished)
can be secured.
Operation
One roll of toilet paper is placed over the post for use. When toilet paper roll is empty, replace with new roll by sliding over the top.
Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
|