|
For Single Roll Option see Model B-6699
Construction
Surface mounted toilet paper roll dispenser with hood is fabricated of 18-8, type 304, 22 gauge stainless steel with the shell and flange as one piece seamless construction. 18 gauge hood is hinged to the shell. The spindles are chrome plated with heavy duty internal springs. They can be switched to the theft resistant spindle B-283-604 (ordered separately). Exposed surfaces are bright polish stainless steel finish.
Installation
Mount unit on wall or partition with four sheet metal screws, furnished by manufacturer, at points indicated by an S.
For partitions with particle-board or other solid core, secure with sheet metal screws furnished, or provide through bolts, nuts,
and washers.
For hollow core metal partitions, provide solid backing into which the furnished sheet metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet metal screws furnished, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
Operation
Spring loaded spindles revolve freely and hold rolls until core is removed.
Warranty
One (1) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for one (1) year from date of sale.
Options
Model B-69997 is the same except with satin finish.
|