Bobrick B-824 Automatic Soap Dispenser

Home > Soap Dispensers > Deck Mounted >

Bobrick B-824 Sureflo® Automatic IR Sensor Lavatory Mtd Liquid Soap Disp, 34 oz

Alternative Views:

List Price: $604.50

Our Price: $377.81

Savings: $226.69

Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days

Product Code: B-824

Qty:

Description

Technical Specs

Bobrick B-824 Sureflo® Automatic IR Sensor Activated Lavatory Mounted Liquid Soap Dispenser, 34 oz, Bright Polish

Construction
Automatic liquid soap dispenser has chrome plated plastic spout connected to stem assembly that connects to soap bottle. The unit comes equipped with a spring loaded 180 degree rotatable lid with concealed locking mechanism for top filling. The soap bottle is fabricated of translucent, shatter resistant polyethylene. A plastic gear pump is submerged in the bottom of the bottle, pumps the liquid soap through a vinyl tube to spout. Attached to the bottom of the bottle is water resistant housing that houses the PC board, motor that drives the gear pump, and the gear pump housing. It includes a portion control knob, flush button to allow for system cleaning and maintenance, a connector for the fiber optic cables, and power port. There are a pair of fiber optic cables that connects the plastic activation lenses to an IR sensor located on the PC board in the bottom housing. A third plastic fiber optic cable connects an LED located on the PC Board to an acrylic lens at the tip of the spout (solid green LED means dispense activity and a blinking red LED indicates low battery life.) A water resistant battery pack fabricated of plastic holds 4 alkaline "D" cell batteries (not included). Capacity: 34 fl oz

Installation
Unit is designed for installation into counters up to 2" maximum thickness with 1-3/8" diameter mounting hole. Unit may be mounted through special hole requisitioned when lavatory is ordered from manufacturer (specify hole location). Recommended mounting location is between 6" to 8" from back wall and 3" from the sink rim to the center of the mounting hole. Minimum 18" vertical and 5" diameter clearance required for soap bottle and bottom housing below mounting hole. Mount Battery Pack (mounting hardware located inside Battery Pack) on back or side wall in a convenient location nearest dispenser for ease of access to replace batteries. Install 4 “D” cell high quality batteries (not included) in battery pack and insert plug in power port on bottom housing.

Designers Note: Unit is not compatible with above the counter sink rims greater than 1" W x 1-1/2" H or 2-1/2" W x 1/2" H. Caution: Sink rim must not come into contact with activation area. For more information refer to the owner's manual.

Operation
To fill dispenser, insert tip of standard BobKey provided into opening of the concealed locking mechanism in the Spout Assembly with spout body to disengage door for quick and easy top filling. Lid will rotate open for filling dispenser with bulk liquid hand soap. Rotate door counter-clockwise to close and lock in place.

To activate dispenser, place hand under spout near the sensor for approximately 1/2 second. Spout dispenses adjustable amount (adjustment range approximately .4 to 3 ml.) of liquid hand soap.

Designers Note: Bobrick Liquid soap dispensers are designed to dispense commercially marketed all purpose hand soaps including liquid and lotion soap and synthetic detergents. Acceptable soaps need to have a viscosity in the range of 1cP to 19,000cP (centipoise).

Warranty
Three (3) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for three (3) years from date of sale.