Bobrick B-828 Foam Soap Dispenser

Home > Soap Dispensers > Deck Mounted >

Bobrick B-828 Sureflo® Automatic IR Sensor Lavatory Mtd Foam Soap Disp, 34 oz

Alternative Views:

List Price: $708.30

Our Price: $442.69

Savings: $265.61

Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days

Product Code: B-828

Qty:

Description

Technical Specs

Bobrick B-828 Sureflo® Automatic IR Sensor Activated Lavatory Mounted Foam Soap Dispenser, 34 oz

Construction
Automatic foam soap dispenser has chrome plated plastic spout connected to the stem assembly that connects to the bottle. The unit comes equipped with a spring loaded 180 degree rotatable lid with concealed locking mechanism for top filling. Inside the grey nozzle tip is a foam mixer cartridge that has an integrated nylon mesh and is removable for mixer cartridge cleaning and maintenance. A diaphragm operated electronic air pump connects to the air tube adapter and supplies air to the foam mixer housing. The soap bottle is fabricated of translucent, shatter resistant polyethylene. A plastic gear pump is submerged in the bottom of the bottle, pumps the liquid foam soap through a vinyl tube to spout. Attached to the bottom of the bottle is water resistant housing that houses the PC board, motor that drives the gear pump, and the gear pump housing. It includes a portion control knob, flush button to allow for system cleaning and maintenance, a connector for the fiber optic cables, and power port. There are a pair of fiber optic cables that connects the plastic activation lenses to an IR sensor located on the PC board in the bottom housing. A third plastic fiber optic cable connects an LED located on the PC Board to an acrylic lens at the tip of the spout (solid green LED means dispense activity and a blinking red LED indicates low battery life.). 6V AC Adapter with US plug comes standard. Optional Battery Pack is available (p/n B-824-241). Capacity: 34 fl oz

Installation
Unit is designed for installation into counters up to 2" maximum thickness with 1-3/8" diameter mounting hole. Unit may be mounted through special hole requisitioned when lavatory is ordered from manufacturer (specify hole location). Recommended mounting location is between 6" to 8" from back wall and 3" from the sink rim to the center of the mounting hole. Minimum 18" vertical and 5" diameter clearance required for soap bottle and bottom housing below mounting hole. Plug AC Adapter into wall and end plug into power port on bottom housing.

Designers Note: Unit is not compatible with above the counter sink rims greater than 1-1/2" W x 1" H or 2-1/2" W x 1/2" H. Caution: Sink rim must not come into contact with activation area. For more information refer to the owner's manual.

Operation
To fill dispenser, insert tip of standard BobKey provided into opening of the concealed locking mechanism in the dispenser body to disengage door for quick and easy top filling. Lid will rotate open for filling dispenser with bulk foam hand soap. Rotate door counter-clockwise to close and lock in place.

To activate dispenser, place hand under spout near the sensor for approximately 1/2 second. Spout will dispense foam that is generated by mixing air and foam soap. The texture may vary depending on the type of soap used.

Designers Note: Bobrick Foam soap dispensers are designed to dispense commercially marketed all purpose foam hand soaps and antibacterial foam soaps that are not alcohol or iodine based. Acceptable foam soaps need to have a viscosity of less than 100cPc (centipoise).

Warranty
Three (3) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for three (3) years from date of sale.