Bobrick B-8281 Foam Soap Dispenser

Home > Soap Dispensers > Deck Mounted >

Bobrick B-8281 Sureflo® Automatic IR Sensor Lavatory Mtd Foam Soap Disp, 34 oz

List Price: $668.40

Our Price: $417.75

Savings: $250.65

Manufacturer: Bobrick
Country of Origin: USA
Availability: Usually Ships within 2-3 Business Days

Product Code: B-8281

Qty:

Description

Technical Specs

Bobrick B-8281 Sureflo® Automatic IR Sensor Activated Lavatory Mounted Foam Soap Dispenser, 34 oz

Construction
Counter-Mounted, Automatic, Top-Fill Bulk Foam Soap Dispenser shall dispense commercially marketed all-purpose bulk foam hand soaps. Spout assembly shall be bright polished chrome plated ABS plastic with integral stem to accommodate up to 2" thick counter tops. 1" stem allows unit to be retrofit into an existing 1" diameter counter hole. Unit shall be equipped with oversized funnel shape opening, covered by a 180 degree rotatable lid with concealed locking mechanism for top filling. Unit shall have LED indicators to show when unit has been activated and low battery life. Unit shall have IR Sensor located on PC board housed in a water-resistant plastic housing. Activation Lens shall allow for defined activation range to eliminate chance of false activation during hand washing. Unit equipped with unique two stage foam mixing chambers. Air pump delivers air to foam mixer housing, combining foam soap solution and air to form a preliminary mixture of foam. Soap is then pumped through spout where a second chamber in the nozzle tip houses a mixer cartridge with nylon mesh which delivers a rich lather of foam soap. Control Dial shall allow field adjustment of foam texture. Unit shall be equipped with an Automatic System Flush Button to allow for cleaning and maintenance. Comes with Battery Pack. Battery Pack uses 4 Alkaline "D" cell batteries (not included). Optional 6V AC Adapter with U.S. Plug available, order Part No 3974-57. For outlets not compatible with U.S. plugs order Part No 3974-55.
Capacity: 34 fl oz

Installation
Unit is designed for installation into counter up to 2" maximum thickness with minimum 1" diameter mounting hole. Unit may be mounted through special hole requisitioned when lavatory is ordered from manufacturer (specify punching locations). Recommended mounting location is between 6" to 8" from back wall and 3" from the sink rim to the center of the mounting hole. Minimum 18" vertical and 5" diameter clearance required for soap bottle and bottom housing below mounting hole. Plug AC Adapter into wall and end plug into power port on bottom housing.

Designers Note: Unit is not compatible with above the counter sink rims greater than 1-1/2" W x 1" H or 2-1/2" W x 1/2" H. Caution: Sink rim must not come into contact with activation area. For more information refer to Form No. 8281-7 Mounting Template in the Installation Instructions.

Operation
To fill dispenser, insert tip of standard key provided into opening of the concealed locking mechanism in the dispenser body to disengage door for quick and easy top filling. Lid will open for filling dispenser with bulk foam hand soap. Rotate door counter-clockwise to close and lock in place.

To activate dispenser, place hand under spout near the sensor for approximately 1/2 second. Spout will dispense foam that is generated by mixing air and foam soap. The texture of the foam can be adjusted by rotating the control dial. The texture may vary depending on the type of soap used.

Designers Note: Bobrick Foam soap dispensers are designed to dispense commercially marketed all purpose foam hand soaps and antibacterial foam soaps that are not alcohol or iodine based. Acceptable foam soaps need to have a viscosity of less than 100cPc (centipoise).

Warranty
Three (3) Year Manufacturer's Warranty - Warranted to be free of defects in material or workmanship for three (3) years from date of sale.

Share your knowledge of this product. Be the first to write a review »

Quick Links

About Us

Contact Us