|
Construction
Automatic liquid soap dispenser has spout and stem assembly constructed in durable die cast zinc and is available in 5 finishes. Unit is equipped with a spring loaded 180 degree rotatable lid with a concealed locking mechanism for top filling. The rotatable lid mechanism consists of metal components. Integrated to spout are a grey plastic dispense tip and activation lens housing. Delrin stem connects to the translucent, shatter resistant high density polyethylene soap bottle. The bottom ABS plastic housing is water resistant and houses the PC board, motor that drives the gear pump responsible for pumping soap through a vinyl tube to the spout, and the gear pump housing. It includes a portion control knob, flush button to allow for system cleaning and maintenance, a connector for the fiber optic cables, and power port. The pair of fiber optic cables connects the plastic activation lenses to an IR sensor located on a PC board in the bottom housing. A third plastic fiber optic cable connects an LED located on the PC board to an acrylic lens at the tip of the spout. LED light indicators show unit is ready for activation when they flash green, unit is in use when there are no indicators on, and flash red when an object remains in the activation zone after single activation.
Dispenses commercially marketed all purpose bulk liquid hand soaps that are not alcohol or iodine based.
Capacity: 34 oz, Approximate adjustable dispense amount: .4 - 3ml
Installation
Unit is designed for installation into counters up to 2" (50mm) maximum thickness with 1-3/8" (35mm) diameter mounting
hole. Unit may be mounted through special hole requisitioned when lavatory is ordered from manufacturer (specify hole
location). Recommended mounting location is between 6" to 8" (150 to 205mm) from back wall and 3" (75mm) from the sink
rim to the center of the mounting hole. Minimum 18" (455mm) vertical and 5" (125mm) diameter clearance required for soap
bottle and bottom housing below mounting hole. Plug AC Adapter (6V AC adapter with US plug included) into wall and end plug into power port on bottom housing.
Designers Note: For sinks with rim over the counter area, ensure that rim does not come in contact with activation area. Please
refer to 858-191 Installation Instructions.
Operation To fill dispenser, insert tip of standard BobKey provided into opening of the concealed locking mechanism in the Spout
Assembly with spout body to disengage door for quick and easy top filling. Lid will rotate open for filling dispenser with bulk
liquid hand soap only. Rotate door counter-clockwise to close and lock in place.
To activate dispenser, place hand under spout near the sensor for approximately 1/2 second. Spout dispenses adjustable
amount (adjustment range approximately .4 to 3ml) of liquid hand soap of various viscosities ranging from 100 to 19,000 cP
(centipoise).
Warranty
Three (3) Year Manufacturer's Limited Warranty
Options Matching faucets are available. Please contact us at [email protected] or call 1-844-699-2779 to talk to one of our friendly experts.
|