ASI 0199-93 Hand Dryer - Division 10 Direct

Home > Hand Dryers > Hand Dryers >

ASI 0199-93 Turbo ADA™ Surface Mtd Automatic Hand Dryer, Satin, GreenSpec

Alternative Views:

List Price: $947.00

Our Price: $520.80

Savings: $426.20

Manufacturer: ASI
Availability: Usually Ships in 3-5 Business Days

Product Code: 0199-93

Voltage*:

110-120V
208V
277V

Qty:

Description

Technical Specs

A Note from the Manufacturer

ASI 0199-93 Turbo ADA™ Surface Mounted ADA Compliant Automatic Hand Dryer, Satin Finish, GreenSpec

Cover Options
White Porcelain Enamel Steel Cover - see model 0199

Construction

ADA Compliant Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal protection. Unit shall develop 60 CFM (102 m3 /h) of heated air and shall provide drying time of less than 15 seconds. Cover shall be heavy-duty, one piece formed 18 gauge stainless steel satin finished (-93) on all exposed surfaces (by option specified) or heavy-duty, one piece formed 18 gauge steel finished on all exposed surfaces with white porcelain enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have C-UL-US® and CE approval and be listed under the re-examination services of Underwriters Laboratories, Inc.

Installation
Surface mount unit on wall with four (4) 1/4" [6,4] washers and screws or bolts (supplied) through holes (provided) in a corrosion protected steel back plate into suitable prepared mountings (by others) or other suitable mounting hardware (by others) to suit wall conditions. Electrical service is supplied and connected (by others) prior to installing cover. Cover is secured to back plate with recessed, pin-hex pan head cap screws (supplied) opened with security wrench (supplied).

For compliance with ICC/ANSI A-117.1-2003 and 2010 ADA Accessibility Standards for adults install unit with bottom of sensor lens 48" maximum above finished floor (MAX AFF) if unobstructed reach access is provided or 44" MAX AFF if forward reach over an obstruction (e.g. vanity or commode) with reach depth greater than 20" and less than 25" is only provided.

For general utility install unit so that sensor lens is 44" to 54" AFF.

Operation

Activate dryer by placing hands under sensor. Dryer automatically shuts off after user removes hands from sensor zone. Complete OM and MT-IG are supplied with unit for future reference of Installation Requirements, Operating Conditions and Service.

Warranty
Unit shall be warranted against defects in materials or workmanship for five (5) years per the manufacturer, American Specialties, Inc.